You may also like. Autel TPMS Sensor 433MHz 315MHz 2 in 1 MX-Sensor Supports Tire Pressure Program. Autel MX-Sensor 2 In 1 (315MHz + 433MHz) Clamp-In OE-Level Programmable Sensor for Tire Pressure Monitoring System (TPMS) 100% Cloneable Fits 98% Mainstream Vehicles. Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearn required. The MX-Sensor is 100% cloneable with the original sensor ID and put in the same position. Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road. The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the unique PRESS release valve design makes the manual sensor replacement much easier. Equipped with an automotive grade battery, a replaceable aluminum valve stem to withstand cold, hot and resistance corrosion, and a high-precision air valve to prevent air leakage, this sensor ensures superior stability and performance. Autel guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 24,000 mile. Each sensor is marked with a series number to track the sensor quality from the factory to ensure that only the highest quality parts are installed. With OE-Level Design, Solid and Functional. This tire pressure monitoring sensor (for TPMS) has been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users’ inventory management and lower the investment as well as sales loss. And it is built to perform like OE sensors in terms of signal, durability and functionality as follows. The unique Autel MX-Sensor patented press release valve design allows rubber and metal sensor valves to freely interchange by hand, without requiring a tool for sensor head fitting. It is equipped with an automotive-grade battery to meet severe weather conditions with long service life for over 5 years. Its high-precision air valve is able to prevent air leakage. The high quality housing can withstand cold, hot and resistance corrosion. The replaceable aluminum valve stem is anodized for corrosion resistance. The device can be assembled real quick to minimize the installation time. 6.12G weight makes the sensor significantly lighter than most sensors in the market. Sensor updates during installation from the AUTEL wireless programming tool which gives the Autel Sensor 2 in 1 a long ability to cover over 98% of all OE sensors on the market, to support up 90% of North American, European and Asian brands. Loose the tire: Remove the valve cap and core and deflate the tire. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. Make sure to program the sensor by AUTEL sensor programming tools for your specific vehicle make, model and year before installation. Do not install programmed TPMS sensor in damaged wheels. In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel. Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged. Battery Life:? 5 years. Operating Temperature: -40°C – 125°C. Storage Temperature: -40°C t – 125°C. Operating Frequency: 315 MHz433MHz. Pressure Monitoring Range: 100 – 900kPa. Pressure Reading Accuracy: ±10kPa. Temperature Reading Range: -40°C – 125°C. Temperature Reading Accuracy: ±5°C. G Sensor Reading Accuracy: ±15%. Battery: 3.0 V. Dimensions (W x H x D): 54.2 mm x 29.4 mm x 19.1 mm (Snap-in Sensor). Weight (Without Valve): 0.034lb. Otherwise a Unpaid Item case will be opened to you. From our China warehouse. For other countries’ buyers. We are authorize distributor, our all items are 100% original and. 12 months free repair for the devices. 3 months for the accessories. If after 7 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 5 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future. What Do We Have? Business time: GMT8 (9:00-18:00) from Monday to Friday. The item “Autel TPMS Sensor 433MHz 315MHz 2 in 1 MX-Sensor Supports Tire Pressure Program” is in sale since Wednesday, September 26, 2018. This item is in the category “eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners”. The seller is “digi-global” and is located in HongKong. This item can be shipped worldwide.

• Brand: Autel
• Manufacturer Part Number: TPMS CAR TIRE PRESSURE SENSOR Autel 433Mhz 315Mhz
• Warranty: 1 Year
• Country/Region of Manufacture: China
• Technical support: Lifetime online
• Delivery: Fast&Safe
• Connectivity: OBD
• Vehicle Type: Passenger Vehicle
• OBD Interface: EOBD
• Features: User Friendly
• Supported System: TPMS
• Accessories: User Guide
• Operating Frequency: 315 MHz~433MHz
• Pressure Reading Accuracy: ±10kPa