4Pcs TPMS Tire Pressure Monitor Sensor 433Mhz For Nissan Patrol Y62 40770-5ZC1A. 4 x TPMS(Tire Pressure Monitoring Sensor). For Nissan Patrol Y62. If you can’t confirm 100% fit, Pls Send us your VIN or part number(s). Loosen the tire: Remove the valve cap and core and deflate the tire. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. We will send item to your. International Buyers Please Note. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated! If after 30 days, or the item has been used, we have the right to decline your claim. Customer Service got fired if they don’t work things out with you, so knock their door at will. There shall be nothing to worry about as we have confidence to solve your issue. For a presumably defective product received, this one would be a bit tricky. Please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here. We wish you understand the pressures here, and our effort will always come to your aid. We greatly appreciate your. Do NOT leave negative or neutral feedback without any contact.