4pcs Autel MX-Sensor 315MHz Programmable TPMS Tire pressure Sensor Metal Stem. Autel MX-Sensor 1 Sensor (Screw-In). As a programmable universal sensor combined both 315MHz + 433MHz frequencies into one TPMS sensor with 98% vehicle coverage. G Sensor Reading Accuracy. Dimensions (W x H x D). 42.424.116.0 mm. Only 1 Sensor (315 + 433MHz) to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearning required. It is 100% clone-able with the original sensor ID and put in the same position. 2.98% VEHICLE COVERAGE. Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road. The unique PRESS release valve design makes the manual sensor replacement much easier. Also it allows easy stem removal from sensor head, and easily programmed wirelessly even when they have already been mounted to the wheel. SAE TESTED & CERTIFIED. Autel high-quality MX-Sensor is tested and certified to meet SAE industry standard J1205/J1206 testing. Being able to withstand severe weather conditions and prevent air leakage, this sensor ensures superior stability and performance. Autel guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 24,000 miles. Noted: Autel MX-Sensor is available to be programmed only with an Autel TPMS diagnostic tool. [Installation Process for Metal Valve (Screw-In)]. Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead. Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead. Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim. Mounting sensor and valve. 1Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw. 2Remove the screw nut from the valve stem. 3Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim. 4Tighten the screw-nut with 4.0Nm with the help of the positioning pin. Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. The item “4pcs Autel MX-Sensor 315MHz Programmable TPMS Tire pressure Sensor Metal Stem” is in sale since Sunday, October 11, 2020. This item is in the category “eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners”. The seller is “maximex-80″ and is located in Newark, Delaware. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Supported System: TPMS
- Brand: Autel
- Manufacturer Part Number: 300030
- Vehicle Type: Passenger Vehicle
- OBD Interface: OBDII