Product we have 2 kinds of monitors, GREY color & WHITE color, please refer to the following photos. Main Function Features Description. After parking, the display will be automatically closed in 35 seconds, and will be automatically start worked when triggered by next movement. In power off status, long press downward button for 3 seconds to start up display. In power on status, long press downward button for 3 seconds to close display. In power on status, short press downward button once, it can adjust displays luminance (high, middle, low 3 levels for option), the factory default is high luminance. In power on status, long press upward button for 3 seconds, can restore factory default setting. BiBi sound, setting success. When alarm is triggered, press any button to turn off the alarm. In power on status, long press setting button for 3 seconds, can enter into system parameter setting. Before using, press the downward button for 3 seconds to start up, then charge the display for 3 to 4 hours. No matter air pressure over 3.0 Bar (43 Psi) or under 2.0 Bar (29 Psi), the system will also give alarm. When it is quick or slow air leakage, it will alarm. This system has been set according to the standard, do not change any setting before using. Suggested air pressure range. 2.2 2.3 Bar in hot summer. 2.4 2.6 Bar in cold winter. WITHOUT SPECIAL DEMAND, DO NOT CHANGE ANY SETTING BEFORE USING. The Learning Code & Display Parameters Setting. Tire learning code method: Press the setting button for 3 seconds to enter the setting interface, see the tire learning icon is flashing, press downward button once to see A tire icon flashing, put the CR1632 battery into the battery holder of the A sensor for power (Note: Refer to external sensor battery replacement chart), when heard Bi sound once, it means A sensor code learning successfully, the press upward button once , the B tire icon is flashing now, put the B sensors battery into the holder for power, when heard Bisound once, it means B sensor code learning successfully. Using the same operating procedures, code learning C sensor & D sensor. After finishing all 4 sensors code larning, then press setting button twice to exit. Note: Internal sensor code learning by quick air exhaust. Each tire code learning interface should not exceed 10 seconds, if exceeded, the system will automatically exit, should press the setting button for 3 seconds to enter settings again. High pressure, low pressure and high temperature parameter settings. (1) Press the setting button for 3 seconds to enter the settings interface, see the tire learning icon is flashing, press the upward button once to see tire settings icon is flashing. Now press the downward button once, see the factory setting high pressure parameter interface (3.0 Bar / 43 Psi), and then press the downward button once again, the first digit is flashing, the press the upward button to transform digit, when transform to the desired digital number, press the downward button once to confirm, the second digit of high pressure is flashing, then press the upward button to transform digit, when transfer to the desired digital number, press the downward button once to confirm, will hear Bi sound, it means the high pressure parameter sets successfully. (2) Then press the upward button once, the factory setting low pressure parameter interface (2.0 Bar / 29 Psi) will appear, and the press the downward button once, the first digit is flashing, then press the upward button to transform digit, when transform to the desired digital number, press the downward button once to confirm, the second digit of low pressure is flashing, then press the upward button to transform digit, when transform to the desired digital number, press the downward button once again to confirm, will hear Bi sound, it means the low pressure parameter sets successfully. Note: If you do not want to change the high pressure, low pressure parameter, enter into the tire setting interface, press the upward button once to enter the settings, then press the upward button twice to set the high temperature parameter directly. In the tire settings interface, after set high pressure, low pressure parameter, press upward button once will display the high temperature interface (68 degree Celsius), then press the downward button once, the first digit is flashing, then press the upward button to transform digit, when transform to the desired digital number, press the downward button once to confirm, the second digit of high temperature is flashing now, press the upward button to transform digit, when transform to the desired digital number, press the downward button once to confirm, will hear Bi sound, it means the high temperature parameter sets successfully. Then press set button twice to exit parameters setting, return to normal display interface. The measurement unit setting. Press the set button for 3 seconds to enter the settings interface, see the tire set icon is flashing, press the downward buton once to enter into setting interface, and then press the upward button for 3 times to see the flashing Bar unit icon in the interface. It means the measurement unit is Bar now (Note: if you see Psi unit icon is flashing in the interface, then measurement unit is Psi); Press the downward button once, will hear Bi sound, at this tim Psi measurement unit icon is flashing, measurement unit icon has been replaced, then press set button twice to exit the measurement unit parameter setting interface, set successfully. ??? Restore to factory setting: Keep pressing upward button for 3 seconds until hear a beep sound to restore to factory setting. The system will clear up all previous settings, and restore to factory settings automatically. When driving speed is over than 20 KM / H, the display automatically refresh the data. Sensor Interface Leak Gas: Nozzle edge is usually caused by uneven gap. Battery Runs Out: Please replace new CR16323.0 V battery by yourself. Tire Conversion Processing: Such as the tire replacement position, the sensor must identify the location of their respective housing swap. This product is only suitable for tire pressure within safe 3.5 BAR (12V) battery model car; Not suitable for use in trucks or 4 wheels with tire pressures over 50 PSI. Tire safety must not rely on this product. Should regularly check the tire, make sure the tires pricking, fragmentation, drum kits and other damage. External sensor battery life is related with cars mileage. Working temperature can not exceed – 20 – + 60 degree Celsius. Internal sensor working temperature range – 40 – + 100 degree Celsius. It may take longer during the holiday seasons. We usually declare lower value. This lower price does not reflect the total price you paid or the market value of the product and may not apply to countries with different tariff rules. All the products we provide is brand new, un-used with original packing. Please refer to the idiographic description of these items. Please ensure that the package is undamaged or resaleable when you return it back. We will do our best on controlling items quality and logistic. However, complication tends to happen on international orders. We will ask compensation from the transport company. Return is not available once the products are damaged by improper use on the buyers end. We sell the products, but excluding the installation guide. We will send the manual to you for studying and please make sure you know how or where to install the products. Therefore, your feedback is extremely important to us. We would keep our promise and do our best to meet customers demand. If you are satisfied with our items, please leave us active feedback. We will work with you to solve any problems. We do not accept neutral or bad comments once your problems are settled down successfully. Thank you very much for your visiting!!! We are working 7×24×365!! The item “2014 New Car Tire Pressure Monitor System TPMS LCD Screen & External Sensors” is in sale since Monday, October 06, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Tire Accessories”. The seller is “hankowwharf” and is located in Wuhan, Hubei. This item can be shipped worldwide.
- Brand: SPY
- Manufacturer Part Number: LPX6GE
- Placement on Vehicle: Left;;Right;;Front;;Rear
- Warranty: Yes
- Country/Region of Manufacture: China
- Type: Car Tire Pressure Monitor With External Sensors
- Model: LPX6
- Features: Car Tyre Temperature Monitor & Pressure Monitor
- Display Working Voltage: 12 V ± 3 V
- Default High Pressure: 43 Psi 3.0 Bar
- Default Low Pressure: 29 Psi 2.0 Bar
- Default High Temperature: 68
- Sensor Working Voltage: CR1632 Battery 3.0 V
- Sensors Emission Current: 13 mA
- Sensor Transmitting Power: 5 dBm
- Sensors Working Life: > 5 Years as usual
- Display Working Temperature: -20 — +60
- Place of Origin: Guangdong Province, China
- Quality Approval: CE FCC Certificates
- Pressure Measurement Range: 0 — 349 KPA
- Display Receiving Frequency: 433.92 MHz
- Sensor Transmitting Frequency: 433.92 MHz
- Display Receiving Sensitivity: -100 dB
- Sensor Working Temperature: -40 — +125
- Warranty Period: Within 1 Year After Delivery
